logo elektroda
logo elektroda
X
logo elektroda

LCR-T4 electronics components tester ATMega328 - Test and Review

TechEkspert 204150 647
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
  • #61 16570948
    goldi74
    Level 43  
    Damage to the tape involves the replacement of the entire display, the tape itself can not be replaced.
  • ADVERTISEMENT
  • #62 16571151
    @GUTEK@
    Level 31  
    Then tell me how to put 18650 with plates in it.
  • #63 16571459
    vodiczka
    Level 43  
    Either a fish or a pip. Or the original layout in a cheap, dedicated housing or modified in a more expensive one :)
  • #64 16571551
    gulson
    System Administrator
    When the testers come, let me know if you want to order more art, if everything works, comments, comments, opinions.
  • #65 16571688
    piterek-23
    Level 33  
    gulson wrote:
    let me know if you want to order more art
    I think that a lot of people wanted to take this gadget for points. The topic "Electronic components tester soon in elektroda.pl gadgets" was founded a week ago, and the number of views is 9k. So there is interest ;)
  • ADVERTISEMENT
  • #66 16571937
    brofran
    Level 41  
    gulson wrote:
    whether to order more art or everything works
    Willing will be for sure. The tester from hitherto gadgets is the most hit. The Chinese certainly sell working devices, sometimes only short-lived. My opinion order! :D
  • #67 16571953
    @GUTEK@
    Level 31  
    vodiczka wrote:
    Either a fish or a pip. Or the original layout in a cheap, dedicated housing or modified in a more expensive one :)
    ... or some idiotic answer. It is a pity that these testers at the start do not display the electrode logo. Because such a tester can be bought by anyone, and a tester with such a logo would be unique.
  • #68 16571997
    piterek-23
    Level 33  
    @gulson, you have an answer ... you have to order testers that will be in a case of colorless acrylic with an engraved logo elektroda.pl and after running, the LCD logo will be displayed :) You have to order large quantities because the bigger queue sets up.
  • ADVERTISEMENT
  • #69 16572166
    p.obelix
    Refrigeration equipment specialist
    piterek-23 wrote:
    @gulson, you have an answer ... you have to order testers that will be in a case of colorless acrylic with an engraved logo elektroda.pl and after running, the LCD logo will be displayed :) You have to order large quantities because the bigger queue sets up.
    Or, to announce a competition for this type of modifications, a prize of 6000 points and glorious songs. A better competition than a housing.
  • #70 16572297
    And!
    Admin of Design group
    E8600 wrote:
    It came to me on Monday, even 7 days. I ordered a USB tester, I am waiting for my phone to fall and I am still testing the battery capacity as many as mAhs. :)
    I was wondering if at elektroda.pl there would be a good place for your descriptions of such experiments / tests / reviews / descriptions possession of equipment from gadgets and more. A department was created, but for the time being thematic (RTV): https://www.elektroda.pl/rtvforum/forum457.html +50 points can be grabbed ;)
    piterek-23 wrote:
    @gulson, you have an answer ... you have to order testers that will be in a case of colorless acrylic with an engraved logo elektroda.pl and after running, the LCD logo will be displayed :) You have to order large quantities because the bigger queue sets up.
    In fact, possible or at least self-realizable, as already mentioned, there are available source materials: https://www.mikrocontroller.net/svnbrowser/transistortester/ and also at elektroda.pl.
    p.obelix wrote:
    Or, to announce a competition for this type of modifications, a prize of 6000 points and glorious songs. A better competition than a housing.
    And this is the idea of the day, the possibility of further development of the gadget obtained from elektroda.pl.
    piterek-23 wrote:
    gulson wrote:
    let me know if you want to order more art
    I think that a lot of people wanted to take this gadget for points. The topic "Electronic components tester soon in elektroda.pl gadgets" was founded a week ago, and the number of views is 9k. So there is interest ;)
    I'm afraid that if someone was eg. Mon-Tues, for example, on vacation and did not look at the elka, he could even miss that such cool things appeared in: https://www.elektroda.pl/rtvforum/shop.php now zajrzy a here empty as after passing a tornado ...
  • #71 16573024
    Karaczan
    Level 42  
    And! wrote:
    A department was created, but for the time being thematic (RTV): https://www.elektroda.pl/rtvforum/forum457.html +50 points can be grabbed
    Generally, it is currently rather a marketing channel stuck to a reputable forum ;) But it's not important and we're not here. I consider the review department of broadly understood workshop equipment as the most-struck. But this is from users, for users. No marketing gibberish, no ads ...
  • #72 16573277
    vodiczka
    Level 43  
    And! wrote:
    I'm afraid that if someone was eg. Mon-t, for example on vacation and did not look at the elka
    Do you remember the fresco of Jan Sztaudynger: "Wash your girlfriend do not know the day or the hour"? The store should be checked several times a day and at least on all days odd :)
  • #73 16573401
    hobbyelektronik
    Level 27  
    I can not get a peek of it, in spite of the required number of points it turns out that I can not buy anything for today because the rules are set so that points must be from this year. Maybe so that if you have not bought anything yet, let a good start to take advantage of the purchase.
  • #74 16573402
    gulson
    System Administrator
    hobbyelektronik wrote:
    I can not get a peek of it, in spite of the required number of points it turns out that I can not buy anything for today because the rules are set so that points must be from this year. Maybe so that if you have not bought anything yet, let a good start to take advantage of the purchase.
    Not this year, and since 2015. And it will be gradually reduced. The first person should receive a tester today.
  • #75 16573414
    vodiczka
    Level 43  
    hobbyelektronik wrote:
    Maybe it would be done that if you have not bought anything yet, let your purchase start.
    A good proposal, I am for such a solution that the FIRST purchase would be "financed" regardless of the period in which the points accumulated. If it is not technically difficult, I would prefer such a solution before extending the period of validity of points.
    hobbyelektronik wrote:
    the rules are set so that the points must be from this year.
    Gulson has already explained that not only this year and I will add that collecting 1000 points a year is no problem.
  • #76 16573446
    gulson
    System Administrator
    vodiczka wrote:
    A good proposal, I am for such a solution that the FIRST purchase would be "financed" regardless of the period in which the points accumulated. If it is not technically difficult, I would prefer such a solution before extending the period of validity of points.
    For now there is no programming time for the development of the store. Another matter would have to be updated regulations, the exemption applied, you probably would have to give the lawyer to check. It's a bit of a problem, especially since the testers went away in 12h, so there is a lot of demand. As soon as there are enough gadgets, the rules will be relieved :) I invite you to express an opinion about the tester, this is the subject and only for this, the remaining statements about the shop will have to give to the subject gadgetomania https://www.elektroda.pl/rtvforum/topic1635313-630.html#16567613 because it gets us disorder.
  • #77 16574286
    DVDM14
    Level 35  
    I got a tester today, unfortunately the display did not survive the meeting with Poczta Polska and only works in half ... ;) LCR-T4 electronics components tester ATMega328 - Test and Review
  • #78 16574449
    HD-VIDEO
    Level 43  
    It's not the Chinese that's packing; Certainly, this tester should not be sent in the bubble envelope itself, just add a stiff cardboard box on both sides
  • #79 16574459
    DVDM14
    Level 35  
    HD-VIDEO wrote:
    Certainly, this tester should not be sent in the bubble envelope itself, just add a stiff cardboard box on both sides
    The tester was additionally protected with foam, but not sufficiently large. The contents of the package looked like this (in the picture, the broken piece of the display was still gently holding). LCR-T4 electronics components tester ATMega328 - Test and Review
  • #80 16574989
    vodiczka
    Level 43  
    DVDM14 wrote:
    The tester was additionally protected with foam, but not sufficiently large. The contents of the package looked like this (in the picture, the broken piece of the display was still gently holding).
    And what's next? Complaint to PP or Gulson and he directs a claim to PP?
    DVDM14 wrote:
    The tester was additionally protected with foam, but not sufficiently large.
    With a strong "tap" date, the foam may not be enough and the stiff cardboard box too. Instead of cardboard, corrugated cardboard or 5mm polystyrene will be better.
  • #81 16575315
    gulson
    System Administrator
    I'm sorry about the problems. I have returned the points and canceled the order, so you will be able to order something else as it appears (now it will be ESP) The tester stays with you or rather what's left of it. Unfortunately, I can not increase the thickness dramatically, because the shipment begins to enter the B dimension (max 2 cm thick). Perhaps the cardboard would fit. I decided that the foil, bubble foil plus additional foam protection would be sufficient against the deteriorating activity of Poczta Polska. Unfortunately, I'm afraid that if more people receive damaged testers, I will have to give up these testers at all in the future. Other shipping methods (> PLN 10) are unfortunately not profitable with free gadgets, and payment for the shipment can not be accepted from users. Besides, the boxes are also rolled, thrown, which is different with displays. She saves many times the foil wrapping and a really big box. I will wait for more reports from the battlefield of Poczta Polska.
  • #82 16575369
    pawelr98
    Level 39  
    You could reduce the thickness if it would desolder the button, "stand" and remove the plastic from under the display. Put it next to the tile and use the saved thickness to secure the shipment. For the average electronics, soldering back will not be too much of a problem. The display on the tape can also be given next to it.
  • #83 16575414
    gulson
    System Administrator
    Who will do it ..... I checked and I do not have any Chinese :) Added after 14 [minutes]: I have received information from one user that the tester has reached the whole and healthy, so for now it is 1 to 1.
  • #84 16575703
    vodiczka
    Level 43  
    gulson wrote:
    I have received information from one user that the tester has reached the whole and healthy, so for now it is 1 to 1.
    I will get 99% on Monday (I ordered on the previous Monday) and I will let you know about the condition of the parcel, but before that came to the userów from the trial series and probably no one advertised.
  • #85 16575774
    gulson
    System Administrator
    All 5 July were sent, so in theory all parcels should already be in place. It is possible that the majority did not write that he had reached the whole and healthy, because people would simply treat it as a normal condition requiring no filing.
  • ADVERTISEMENT
  • #86 16575838
    krzysztofh
    Level 29  
    Hello, I have not got one yet, but when it comes to it, I will let you know in what state. This will be my first gadget from the store, not counting those for the Christmas competition. greetings
  • #87 16575863
    Dydelmax
    Level 39  
    The tester has not reached me yet. As soon as it happens, I will let you know in this topic, and in my free time I will try to test it and share my insights on the Forum.
  • #88 16575905
    gulson
    System Administrator
    Thank you for the information, let me know how it will get and publish opinions. For now, we are waiting patiently, hopefully there will be no more survivors.
  • #89 16578836
    krzysztofh
    Level 29  
    The parcel arrived in its entirety. Does it work I will find out at home how to connect the battery. Thank you and best regards
  • #90 16578868
    CMS
    Administrator of HydePark
    I also had a problem with the package, fortunately everything works, but let me say that when I saw a display dangling loosely on the tape, I was a bit sad, but after connecting the power the smile returned.

Topic summary

The discussion revolves around the LCR-T4 electronics components tester, which utilizes an ATMega328 microcontroller. Users share their experiences with the tester's capabilities, including automatic detection of component types, measurement of inductance, capacitance, and resistance, as well as calibration procedures. Concerns are raised about the accuracy of measurements, particularly with low inductance values and the tester's ability to identify certain components like transistors and diodes. Users also discuss the power supply options, including the use of 9V batteries versus rechargeable alternatives, and modifications to improve functionality. The conversation highlights the tester's utility for hobbyists and its limitations in professional applications.
Summary generated by the language model.
ADVERTISEMENT